Drivers are available from Silicon Labs for Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10, Linux, and Mac OS X.. The tiny unit measures only 0 6″ × 0 95″ including its Micro-USB connector. CP2104 USB-to-serial adapter carrier, bottom view with dimensions This USB-to-serial adapter is a breakout board for the Silicon Labs CP2104 USB-to-UART bridge, and it is a great solution for connecting microcontroller projects and other logic-level serial devices to a personal computer.. The CP2104 is a full-speed USB 2 0 device and allows baud rates of up to 2 Mbps.. For a similar adapter with a USB Mini-B connector, please see the Pololu USB-to-Serial Adapter.. The board is a Micro-USB carrier for the Silicon Labs CP2104 USB-to-UART bridge that provides access to all of its control signal pins and GPIO pins. The adapter looks like a standard virtual serial port (COM port) to the computer’s operating system, which means it can be used with any software designed to work with a serial port (even a legacy RS-232 port).. SpecificationsDimensions: 0 6″ × 0 95″ including connectorUSB standard: USB 2.. As a result, this CP2104 adapter board can be used as a drop-in replacement for an FTDI cable in many applications, such as programming Arduino-compatible boards.. Alternatively, a 1×6 header can be soldered to the end of the board, as shown in the right picture below.. 0 (full speed)Connector: USB Micro-BLogic voltage level: 3 45 V (5 V tolerant)Supported baud rates: 300 bps to 2 MbpsSupply current: 25 mAUsing the adapter(often used with RTS)(often used with CTS)(often used with DTR)(often used with DSR)(connected to green LED)ConnectionsAll of the adapter’s pins are available in two rows spaced 0. Being Brave ![]()
![]()
![]()
It offers several options for accessing the data, control, and GPIO pins on the CP2104, all of which are made available on a 0.. This product requires a USB A to Micro-B cable (not included) to connect to a computer.. This gives access to six signals (RTS, RX, TX, VBUS, CTS, and GND) that are commonly found on FTDI cables and other similar USB-to-serial adapters.. CP2104 USB-to-serial adapter carrier in a breadboard with included 0 1″ male headers installed.. 45 V as a logic high The green LED on the SUSPEND line indicates an active USB connection when lit.. 5″ apart along the sides of the board This allows any pin to be accessed easily while the adapter is plugged into a solderless breadboard, as shown in the left picture below. ae05505a44
0 Comments
Leave a Reply. |